wolfseal KB 16 roll
The product
The wolfseal KB 16 consists of fully coated, hot-dip galvanized sheet steel elements on both sides. At the top, the wolfseal KB 16 element is equipped with a protective film on both sides, which is provided with a tear-off edge in the overlap area – at the bottom with white protective paper. The wolfseal special composite coating ensures that construction joints are impermeable to water thanks to the bond with the fresh concrete at an embedment depth of just 3 cm.
The elements are 2 m long, 16.7 cm high and approx. 1.2 mm thick. The packaging unit contains 150 running meters of wolfseal KB 16 including butt clamps.
With an embedment depth of 3 cm, the wolfseal KB 16 is tested up to 5.0 bar.
The field of application
wolfseal KB 16 is used in all construction joints of water-impermeable structures, horizontal or vertical, for pressing and non-pressing water. wolfseal KB 16 is resistant to all organic waste water (according to the chemical inventory list).
The groundwater compatibility of wolfseal KB 16 has been tested and is given.
The processing
wolfseal KB 16 is installed on the upper reinforcement layer in the middle of the wall before concreting after the lower protective paper has been removed. The individual elements are each overlapped by 8 cm, pressed firmly together and secured with the supplied joint protection. For water columns of more than 8 m, the joint must also be secured with joint grout.
The wolfseal easyfix retaining brackets available as accessories are used for fastening. When installing in wall/wall and floor/floor joints, the elements are fixed in the middle between the support. Crossing points are secured with the wolfseal cross clamp supplied. The processing guidelines must be observed.
Delivery size
incl. 3 x butt clamps, 2 x cross clamps and 10 x easyfix retaining brackets
Roll of 25 running meters
incl. 6 x butt clamps, 4 x cross clamps and 25 x easyfix retaining brackets
Tested water pressure of 5.0 bar
Fast and reliable sealing of all construction joints without the need for time-consuming concrete upstands and reinforcement recesses
Quick and easy installation even before concreting
wolfseal special composite coating with bond to concrete
Can be used in combination with other wolfseal products
Approvals
Product data sheet
Tender texts
Assembly instructions
Accessories
Watertight connection of the wolfseal joint system to all commercially available expansion joint systems. For professional sealing of equipotential bonding, pipe penetrations or for repairing Watertight formwork clamping points for use in white tanks made of in-situ concrete with wolfseal special composite coating applied in the middle. Closing profile for closing the wall element joints in panel walls. For use with Closing profile for closing the wall element joints in panel walls. For use with
wolfseal expansion joint connection
wolfseal connecting tape
damaged coatings on joint systems.
wolfseal wall thickness WU
wolfseal locking profile Straight
straight joints and external corners. 
wolfseal locking profile corner
recessed corners (internal corners).
Do you have a question or would you like to order?
We are just a phone call or e-mail away and look forward to hearing from you.
info@wolfseal.de
