wolfseal wall duct KG 2000
The product
The wolfseal wall ducts consist of KG 2000 pipes with a central water barrier and are also fitted with a wolfseal connection tape. This guarantees double security against water permeability.
Tested by the MFPA Leipzig up to 50 m water column.
The field of application
wolfseal pipe penetrations are used wherever watertight penetrations of media and waste water pipes are required. wolfseal pipe penetrations can be used for in-situ concrete, prefabricated walls and solid concrete walls.
The processing
The polystyrene ring is removed from the pipe penetration and fixed to the intended position on the outer formwork with nails. The outer reinforcement is then installed. Now insert the pipe penetration into the polystyrene ring and remove the protective film. The inner reinforcement is then installed and prepared for concreting. Ensure that the end cap is fitted to the pipe.
The processing guidelines must be observed.
Delivery size
Box of 1 piece
DN 100 | DN 125 | DN 150 | DN 200
WD 24 – 50
Tested up to 5 bar
Quick and easy installation
Cover to prevent contamination of the pipe penetration
Double security against water permeability thanks to a central water barrier and wolfseal connecting tape
Suitable for any wall thickness and available for all conventional nominal widths
Commercially available pipe systems can be connected without any problems
Approvals
Product data sheet
Tender texts
Assembly instructions
Do you have a question or would you like to order?
We are just a phone call or e-mail away and look forward to hearing from you.
info@wolfseal.de
