thepro DDS
Straight
Outside corner
Inside corner
The product
Thepro DDS is a combination of the wolfseal fresh concrete composite waterproofing membrane and XPS thermal insulation. It can be used both for floor slabs without a basement and for slab edge formwork.
Thepro DDS is available in all commercially available insulation thicknesses. The wolfseal fresh concrete composite sealing membrane creates a watertight connection between the thermal insulation and the face of the floor/ceiling slab as well as to the splash water protection in the plinth area and connects both surfaces with each other in a watertight manner.
Doors or floor-to-ceiling windows can be connected easily and watertight to the top of thepro DDS.
Thermal conductivity (standard insulation) / nominal value
80-120 mm 0.035 W/mK
140-160 mm 0.036 W/mK
180-200 mm 0.037 W/mK
Fatigue strength 130 kPa
other specifications on request
The field of application
Thepro DDS provides waterproofing and thermal insulation for the plinth area of buildings with and without basements.
The processing
Due to the enormous dimensional stability of the elements, thepro DDS can be used as a formwork panel for floor and ceiling slabs.
– thepro DDS can be used as a formwork panel for buildings without a basement with an elastically bedded floor slab
– for buildings with basements, thepro DDS is attached to the wall crown as slab edge formwork
The subsequent sealing measures, such as the connection to doors or floor-to-ceiling windows or splash water protection on the outside of the base, can be carried out with tested mineral or bituminous coatings or with liquid plastics. The connection surfaces to subsequent seals are always level and freely accessible.
The processing guidelines must be observed.
Delivery size
thepro DDS Straight
Length: 2.40 m
Height: 20, 25, 30, 35, 40, 60 cm
Insulation thicknesses: 80 – 200 mm
thepro DDS outside corner
Outer leg: 120 cm + insulation thickness
Height: 20, 25, 30, 35, 40, 60 cm
Insulation thicknesses: 80 – 200 mm
thepro DDS inside corner
Outer leg: 120 cm – Insulation thickness
Height: 20, 25, 30, 35, 40, 60 cm
Insulation thicknesses: 80 – 200 mm
Simple application of waterproofing and thermal insulation in the plinth area
Secure and freely accessible connection options for all subsequent sealing measures
Tight bond to elastic sealing slurries and bituminous thick coatings
Optimum connection to floor-to-ceiling windows and doors
Tested system solution
Approvals
Approvals
Product data sheet
Tender texts
Assembly instructions
Accessories
thepro DDS impact sealing tape
For professional sealing of vertical joints between thepro elements.
thepro DDS reveal element
For the professional connection of floor-to-ceiling windows and doors in the construction method with facing brickwork.
thepro DDS for ceiling projections
Used to insulate and seal the base area of buildings where the basement ceiling is offset.
Mounting thepro DDS
for buildings with basements
See how easy it can be to seal, insulate and form the plinth area of buildings with basements.
Mounting thepro DDS
for buildings without a basement
See how thepro DDS acts as waterproofing, insulation and formwork board for the base of buildings without basements.
Do you have a question or would you like to order?
We are just a phone call or e-mail away and look forward to hearing from you.
info@wolfseal.de
